dmesg - Intel Core i7 720Q
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bb7c1fff] usable
BIOS-e820: [mem 0x00000000bb7c2000-0x00000000bbec1fff] reserved
BIOS-e820: [mem 0x00000000bbec2000-0x00000000bbfc1fff] ACPI NVS
BIOS-e820: [mem 0x00000000bbfc2000-0x00000000bbffefff] ACPI data
BIOS-e820: [mem 0x00000000bbfff000-0x00000000bbffffff] usable
BIOS-e820: [mem 0x00000000bc000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
BIOS-e820: [mem 0x00000000fed19000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable
NX (Execute Disable) protection: active
DMI 2.6 present.
DMI: Hewlett-Packard HP EliteBook 8540w/1521, BIOS 68CVD Ver. F.0E 11/25/2010
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x440000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFC00000 mask FFFC00000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 100000000 mask F00000000 write-back
4 base 200000000 mask E00000000 write-back
5 base 400000000 mask FC0000000 write-back
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xbc000 max_arch_pfn = 0x400000000
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0xbbffffff]
[mem 0x00000000-0xbbffffff] page 2M
kernel direct mapping tables up to 0xbbffffff @ [mem 0x1fffc000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x43fffffff]
[mem 0x100000000-0x43fffffff] page 2M
kernel direct mapping tables up to 0x43fffffff @ [mem 0xbb7b0000-0xbb7c1fff]
RAMDISK: [mem 0x362e4000-0x37169fff]
ACPI: RSDP 00000000000fddc0 00024 (v02 HPQOEM)
ACPI: XSDT 00000000bbffe120 0008C (v01 HPQOEM SLIC-MPC 0000000F 01000013)
ACPI: FACP 00000000bbffc000 000F4 (v03 HPQOEM 1521 0000000F HP 00000001)
ACPI: DSDT 00000000bbfda000 1C77F (v02 HPQOEM 1521 00000001 INTL 20060912)
ACPI: FACS 00000000bbf40000 00040
ACPI: HPET 00000000bbffb000 00038 (v01 HPQOEM 1521 00000001 HP 00000001)
ACPI: APIC 00000000bbffa000 000BC (v01 HPQOEM 1521 00000001 HP 00000001)
ACPI: MCFG 00000000bbff9000 0003C (v01 HPQOEM 1521 00000001 HP 00000001)
ACPI: TCPA 00000000bbff7000 00032 (v02 HPQOEM 1521 00000000 HP 00000001)
ACPI: SSDT 00000000bbfd7000 00135 (v01 HPQOEM SataAhci 00001000 INTL 20060912)
ACPI: SSDT 00000000bbfd6000 00314 (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
ACPI: SLIC 00000000bbfd5000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
ACPI: SSDT 00000000bbfd1000 02576 (v01 HPQOEM NVIDIAGF 00000001 INTL 20060912)
ACPI: SSDT 00000000bbfd0000 00A10 (v01 PmRef CpuPm 00003000 INTL 20060912)
ACPI: SSDT 00000000bbfcf000 00288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
ACPI: SSDT 00000000bbfce000 00225 (v01 PmRef ApTst 00003000 INTL 20060912)
ACPI: ASF! 00000000bbff8000 000A0 (v32 HPQOEM 1521 00000001 HP 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043fffffff]
Initmem setup node 0 [mem 0x00000000-0x43fffffff]
NODE_DATA [mem 0x43fffc000-0x43fffffff]
[ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042f600000-ffff88043f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x43fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009efff]
node 0: [mem 0x00100000-0xbb7c1fff]
node 0: [mem 0xbbfff000-0xbbffffff]
node 0: [mem 0x100000000-0x43fffffff]
On node 0 totalpages: 4175698
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3913 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 747523 pages, LIFO batch:31
Normal zone: 53248 pages used for memmap
Normal zone: 3354624 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bb7c2000 - 00000000bbec2000
PM: Registered nosave memory: 00000000bbec2000 - 00000000bbfc2000
PM: Registered nosave memory: 00000000bbfc2000 - 00000000bbfff000
PM: Registered nosave memory: 00000000bc000000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
PM: Registered nosave memory: 00000000fed14000 - 00000000fed19000
PM: Registered nosave memory: 00000000fed19000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000
PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffd00000
PM: Registered nosave memory: 00000000ffd00000 - 0000000100000000
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88043fc00000 s83584 r8192 d22912 u262144
pcpu-alloc: s83584 r8192 d22912 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4106060
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16342924k/17825792k available (6711k kernel code, 1123000k absent, 359868k reserved, 6459k data, 928k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:744 16
Extended CMOS year: 2000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration failed
TSC: PIT calibration matches HPET. 1 loops
Detected 1596.003 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.00 BogoMIPS (lpj=6384012)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 25118 entries in 99 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
CPU erratum AAJ80 worked around
CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
Brought up 8 CPUs
Total of 8 processors activated (25536.04 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbbec2000-0xbbfc1fff] (1048576 bytes)
dummy:
RTC time: 16:09:14, date: 11/24/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bbebba98 002F1 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 002F1 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
ACPI: SSDT 00000000bbeba018 008AA (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 008AA (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
ACPI: SSDT 00000000bbebb718 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
ACPI: SSDT 00000000bbeb9d98 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
Freeing initrd memory: 14872k freed
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [APPR] (off)
ACPI: Power Resource [LPP] (on)
ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: >host bridge window [mem 0xc0000000-0xdfffffff]
pci_root PNP0A08:00: >host bridge window [mem 0xf0000000-0xfedfffff]
pci_root PNP0A08:00: >host bridge window [mem 0xfee01000-0xffffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >root bus resource [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: >root bus resource [mem 0xf0000000-0xfedfffff]
pci_bus 0000:00: >root bus resource [mem 0xfee01000-0xffffffff]
pci 0000:00:00.0: >[8086:d132] type 00 class 0x060000
pci 0000:00:03.0: >[8086:d138] type 01 class 0x060400
pci 0000:00:03.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: >[8086:d155] type 00 class 0x088000
pci 0000:00:08.1: >[8086:d156] type 00 class 0x088000
pci 0000:00:08.2: >[8086:d157] type 00 class 0x088000
pci 0000:00:08.3: >[8086:d158] type 00 class 0x088000
pci 0000:00:10.0: >[8086:d150] type 00 class 0x088000
pci 0000:00:10.1: >[8086:d151] type 00 class 0x088000
pci 0000:00:16.0: >[8086:3b64] type 00 class 0x078000
pci 0000:00:16.0: >reg 10: [mem 0xd7524000-0xd752400f 64bit]
pci 0000:00:16.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: >[8086:3b67] type 00 class 0x070002
pci 0000:00:16.3: >reg 10: [io 0x6050-0x6057]
pci 0000:00:16.3: >reg 14: [mem 0xd752b000-0xd752bfff]
pci 0000:00:19.0: >[8086:10ea] type 00 class 0x020000
pci 0000:00:19.0: >reg 10: [mem 0xd7500000-0xd751ffff]
pci 0000:00:19.0: >reg 14: [mem 0xd752a000-0xd752afff]
pci 0000:00:19.0: >reg 18: [io 0x6020-0x603f]
pci 0000:00:19.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: >[8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: >reg 10: [mem 0xd7529000-0xd75293ff]
pci 0000:00:1a.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: >[8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: >reg 10: [mem 0xd7520000-0xd7523fff 64bit]
pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: >[8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: >[8086:3b44] type 01 class 0x060400
pci 0000:00:1c.1: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: >[8086:3b48] type 01 class 0x060400
pci 0000:00:1c.3: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: >[8086:3b50] type 01 class 0x060400
pci 0000:00:1c.7: >PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: >[8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: >reg 10: [mem 0xd7528000-0xd75283ff]
pci 0000:00:1d.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: >[8086:2448] type 01 class 0x060401
pci 0000:00:1f.0: >[8086:3b07] type 00 class 0x060100
pci 0000:00:1f.2: >[8086:3b2f] type 00 class 0x010601
pci 0000:00:1f.2: >reg 10: [io 0x6048-0x604f]
pci 0000:00:1f.2: >reg 14: [io 0x605c-0x605f]
pci 0000:00:1f.2: >reg 18: [io 0x6040-0x6047]
pci 0000:00:1f.2: >reg 1c: [io 0x6058-0x605b]
pci 0000:00:1f.2: >reg 20: [io 0x6000-0x601f]
pci 0000:00:1f.2: >reg 24: [mem 0xd7527000-0xd75277ff]
pci 0000:00:1f.2: >PME# supported from D3hot
pci 0000:01:00.0: >[10de:0cbc] type 00 class 0x030000
pci 0000:01:00.0: >reg 10: [mem 0xd2000000-0xd2ffffff]
pci 0000:01:00.0: >reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: >reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: >reg 24: [io 0x5000-0x507f]
pci 0000:01:00.0: >reg 30: [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.1: >[10de:0be4] type 00 class 0x040300
pci 0000:01:00.1: >reg 10: [mem 0xd3000000-0xd3003fff]
pci 0000:00:03.0: >PCI bridge to [bus 01-01]
pci 0000:00:03.0: > bridge window [io 0x5000-0x5fff]
pci 0000:00:03.0: > bridge window [mem 0xd2000000-0xd30fffff]
pci 0000:00:03.0: > bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
pci 0000:00:1c.0: > bridge window [mem 0xd7400000-0xd74fffff]
pci 0000:00:1c.1: >PCI bridge to [bus 03-43]
pci 0000:00:1c.1: > bridge window [io 0x3000-0x4fff]
pci 0000:00:1c.1: > bridge window [mem 0xd3400000-0xd73fffff]
pci 0000:44:00.0: >[8086:4238] type 00 class 0x028000
pci 0000:44:00.0: >reg 10: [mem 0xd3300000-0xd3301fff 64bit]
pci 0000:44:00.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: >PCI bridge to [bus 44-44]
pci 0000:00:1c.3: > bridge window [mem 0xd3300000-0xd33fffff]
pci 0000:45:00.0: >[1033:0194] type 00 class 0x0c0330
pci 0000:45:00.0: >reg 10: [mem 0xd3200000-0xd3201fff 64bit]
pci 0000:45:00.0: >PME# supported from D0 D3hot
pci 0000:00:1c.7: >PCI bridge to [bus 45-45]
pci 0000:00:1c.7: > bridge window [mem 0xd3200000-0xd32fffff]
pci 0000:46:06.0: >[1180:0832] type 00 class 0x0c0010
pci 0000:46:06.0: >proprietary Ricoh MMC controller disabled (via firewire function)
pci 0000:46:06.0: >MMC cards are now supported by standard SDHCI controller
pci 0000:46:06.0: >reg 10: [mem 0xd3101000-0xd31017ff]
pci 0000:46:06.0: >supports D1 D2
pci 0000:46:06.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:46:06.1: >[1180:0822] type 00 class 0x080500
pci 0000:46:06.1: >reg 10: [mem 0xd3105000-0xd31050ff]
pci 0000:46:06.1: >supports D1 D2
pci 0000:46:06.1: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:46:06.2: >[1180:0592] type 00 class 0x088000
pci 0000:46:06.2: >reg 10: [mem 0xd3103000-0xd31030ff]
pci 0000:46:06.2: >supports D1 D2
pci 0000:46:06.2: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:46:06.3: >[1180:0852] type 00 class 0x088000
pci 0000:46:06.3: >reg 10: [mem 0xd3102000-0xd31020ff]
pci 0000:46:06.3: >supports D1 D2
pci 0000:46:06.3: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:46:06.4: >[1180:0476] type 02 class 0x060700
pci 0000:46:06.4: >reg 10: [mem 0xd3100000-0xd3100fff]
pci 0000:46:06.4: >supports D1 D2
pci 0000:46:06.4: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1e.0: >PCI bridge to [bus 46-47] (subtractive decode)
pci 0000:00:1e.0: > bridge window [io 0x2000-0x2fff]
pci 0000:00:1e.0: > bridge window [mem 0xd3100000-0xd31fffff]
pci 0000:00:1e.0: > bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: > bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: > bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: > bridge window [mem 0xf0000000-0xfedfffff] (subtractive decode)
pci 0000:00:1e.0: > bridge window [mem 0xfee01000-0xffffffff] (subtractive decode)
pci_bus 0000:47: >[bus 47-4a] partially hidden behind transparent bridge 0000:46 [bus 46-47]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
pci0000:00: >Requesting ACPI _OSC control (0x1d)
pci0000:00: >ACPI _OSC control (0x1d) granted
ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
PCI host bridge to bus 0000:ff
pci 0000:ff:00.0: >[8086:2c52] type 00 class 0x060000
pci 0000:ff:00.1: >[8086:2c81] type 00 class 0x060000
pci 0000:ff:02.0: >[8086:2c90] type 00 class 0x060000
pci 0000:ff:02.1: >[8086:2c91] type 00 class 0x060000
pci 0000:ff:03.0: >[8086:2c98] type 00 class 0x060000
pci 0000:ff:03.1: >[8086:2c99] type 00 class 0x060000
pci 0000:ff:03.4: >[8086:2c9c] type 00 class 0x060000
pci 0000:ff:04.0: >[8086:2ca0] type 00 class 0x060000
pci 0000:ff:04.1: >[8086:2ca1] type 00 class 0x060000
pci 0000:ff:04.2: >[8086:2ca2] type 00 class 0x060000
pci 0000:ff:04.3: >[8086:2ca3] type 00 class 0x060000
pci 0000:ff:05.0: >[8086:2ca8] type 00 class 0x060000
pci 0000:ff:05.1: >[8086:2ca9] type 00 class 0x060000
pci 0000:ff:05.2: >[8086:2caa] type 00 class 0x060000
pci 0000:ff:05.3: >[8086:2cab] type 00 class 0x060000
pci0000:ff: >Requesting ACPI _OSC control (0x1d)
pci0000:ff: >ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbb7c2000-0xbbffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 40 for MSI
hpet: hpet3 irq 41 for MSI
hpet: hpet4 irq 42 for MSI
hpet: hpet5 irq 43 for MSI
hpet: hpet6 irq 44 for MSI
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-fe]
pnp 00:00: >[io 0x0000-0x0cf7 window]
pnp 00:00: >[io 0x0cf8-0x0cff]
pnp 00:00: >[io 0x0d00-0xffff window]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000c0000-0x000c3fff window]
pnp 00:00: >[mem 0x000c4000-0x000c7fff window]
pnp 00:00: >[mem 0x000c8000-0x000cbfff window]
pnp 00:00: >[mem 0x000cc000-0x000cffff window]
pnp 00:00: >[mem 0x000d0000-0x000d3fff window]
pnp 00:00: >[mem 0x000d4000-0x000d7fff window]
pnp 00:00: >[mem 0x000d8000-0x000dbfff window]
pnp 00:00: >[mem 0x000dc000-0x000dffff window]
pnp 00:00: >[mem 0x000e0000-0x000e3fff window]
pnp 00:00: >[mem 0x000e4000-0x000e7fff window]
pnp 00:00: >[mem 0x000e8000-0x000ebfff window]
pnp 00:00: >[mem 0x000ec000-0x000effff window]
pnp 00:00: >[mem 0x000f0000-0x000fffff window]
pnp 00:00: >[mem 0xc0000000-0xdfffffff window]
pnp 00:00: >[mem 0xf0000000-0xfedfffff window]
pnp 00:00: >[mem 0xfee01000-0xffffffff window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: >[mem 0xfed1c000-0xfed1ffff]
pnp 00:01: >[mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:01: >[mem 0xfed1b000-0xfed1bfff]
pnp 00:01: >[mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:01: >[mem 0xd7600000-0xd7600fff]
pnp 00:01: >[mem 0xe0000000-0xefffffff]
pnp 00:01: >[mem 0xfed20000-0xfed3ffff]
pnp 00:01: >[mem 0xfed90000-0xfed8ffff disabled]
pnp 00:01: >[mem 0xfed45000-0xfed8ffff]
pnp 00:01: >[mem 0xfec00000-0xfec00fff]
system 00:01: >[mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: >[mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: >[mem 0xd7600000-0xd7600fff] has been reserved
system 00:01: >[mem 0xe0000000-0xefffffff] has been reserved
system 00:01: >[mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: >[mem 0xfed45000-0xfed8ffff] has been reserved
system 00:01: >[mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: >[io 0x0000-0x001f]
pnp 00:02: >[io 0x0081-0x0091]
pnp 00:02: >[io 0x0093-0x009f]
pnp 00:02: >[io 0x00c0-0x00df]
pnp 00:02: >[dma 4]
pnp 00:02: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: >[mem 0xff000000-0xffffffff]
pnp 00:03: >Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:04: >[io 0xfe00-0xfe0f]
pnp 00:04: >[io 0xfe80-0xfe8f]
pnp 00:04: >[mem 0xfed40000-0xfed44fff]
pnp 00:04: >Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
pnp 00:05: >[mem 0xfed00000-0xfed003ff]
pnp 00:05: >Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:06: >[io 0x00f0]
pnp 00:06: >[irq 13]
pnp 00:06: >Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: >[io 0x002e-0x002f]
pnp 00:07: >[io 0x004e-0x004f]
pnp 00:07: >[io 0x0061]
pnp 00:07: >[io 0x0063]
pnp 00:07: >[io 0x0065]
pnp 00:07: >[io 0x0067]
pnp 00:07: >[io 0x0070]
pnp 00:07: >[io 0x0080]
pnp 00:07: >[io 0x0092]
pnp 00:07: >[io 0x00b2-0x00b3]
pnp 00:07: >[io 0x0200-0x027f]
pnp 00:07: >[io 0x1000-0x100f]
pnp 00:07: >[io 0xffff]
pnp 00:07: >[io 0xffff]
pnp 00:07: >[io 0x0400-0x047f]
pnp 00:07: >[io 0x0500-0x057f]
pnp 00:07: >[io 0xef80-0xef9f]
system 00:07: >[io 0x0200-0x027f] has been reserved
system 00:07: >[io 0x1000-0x100f] has been reserved
system 00:07: >[io 0xffff] has been reserved
system 00:07: >[io 0xffff] has been reserved
system 00:07: >[io 0x0400-0x047f] has been reserved
system 00:07: >[io 0x0500-0x057f] has been reserved
system 00:07: >[io 0xef80-0xef9f] has been reserved
system 00:07: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: >[io 0x0070-0x0077]
pnp 00:08: >[irq 8]
pnp 00:08: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:09: >[io 0x0378-0x037f]
pnp 00:09: >[io 0x0778-0x077a]
pnp 00:09: >[irq 5]
pnp 00:09: >[dma 0 disabled]
pnp 00:09: >Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:0a: >[io 0x0060]
pnp 00:0a: >[io 0x0064]
pnp 00:0a: >[irq 1]
pnp 00:0a: >Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:0b: >[irq 12]
pnp 00:0b: >Plug and Play ACPI device, IDs SYN0166 SYN0100 SYN0002 PNP0f13 (active)
pnp 00:0c: >[irq 23]
pnp 00:0c: >Plug and Play ACPI device, IDs HPQ0004 (active)
pnp 00:0d: >[bus ff]
pnp 00:0d: >Plug and Play ACPI device, IDs PNP0a03 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:01:00.0: >no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
pci 0000:00:1c.1: >bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-43] add_size 200000
pci 0000:46:06.4: >res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:00:1e.0: >bridge window [mem 0x04000000-0x03ffffff pref] to [bus 46-47] add_size 4000000
pci 0000:00:1e.0: >res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:00:1c.1: >res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1e.0: >BAR 15: assigned [mem 0xd8000000-0xdbffffff pref]
pci 0000:00:1c.1: >BAR 15: assigned [mem 0xd7700000-0xd78fffff 64bit pref]
pci 0000:01:00.0: >BAR 6: assigned [mem 0xd3080000-0xd30fffff pref]
pci 0000:00:03.0: >PCI bridge to [bus 01-01]
pci 0000:00:03.0: > bridge window [io 0x5000-0x5fff]
pci 0000:00:03.0: > bridge window [mem 0xd2000000-0xd30fffff]
pci 0000:00:03.0: > bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
pci 0000:00:1c.0: > bridge window [mem 0xd7400000-0xd74fffff]
pci 0000:00:1c.1: >PCI bridge to [bus 03-43]
pci 0000:00:1c.1: > bridge window [io 0x3000-0x4fff]
pci 0000:00:1c.1: > bridge window [mem 0xd3400000-0xd73fffff]
pci 0000:00:1c.1: > bridge window [mem 0xd7700000-0xd78fffff 64bit pref]
pci 0000:00:1c.3: >PCI bridge to [bus 44-44]
pci 0000:00:1c.3: > bridge window [mem 0xd3300000-0xd33fffff]
pci 0000:00:1c.7: >PCI bridge to [bus 45-45]
pci 0000:00:1c.7: > bridge window [mem 0xd3200000-0xd32fffff]
pci 0000:46:06.4: >res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:46:06.4: >res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
pci 0000:46:06.4: >res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:46:06.4: >res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:46:06.4: >BAR 15: assigned [mem 0xd8000000-0xdbffffff pref]
pci 0000:46:06.4: >BAR 16: assigned [mem 0xdc000000-0xdfffffff]
pci 0000:46:06.4: >BAR 13: assigned [io 0x2000-0x20ff]
pci 0000:46:06.4: >BAR 14: assigned [io 0x2400-0x24ff]
pci 0000:46:06.4: >CardBus bridge to [bus 47-4a]
pci 0000:46:06.4: > bridge window [io 0x2000-0x20ff]
pci 0000:46:06.4: > bridge window [io 0x2400-0x24ff]
pci 0000:46:06.4: > bridge window [mem 0xd8000000-0xdbffffff pref]
pci 0000:46:06.4: > bridge window [mem 0xdc000000-0xdfffffff]
pci 0000:00:1e.0: >PCI bridge to [bus 46-47]
pci 0000:00:1e.0: > bridge window [io 0x2000-0x2fff]
pci 0000:00:1e.0: > bridge window [mem 0xd3100000-0xd31fffff]
pci 0000:00:1e.0: > bridge window [mem 0xd8000000-0xdbffffff pref]
pci 0000:00:1e.0: >setting latency timer to 64
pci 0000:46:06.4: >setting latency timer to 64
pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >resource 7 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: >resource 8 [mem 0xf0000000-0xfedfffff]
pci_bus 0000:00: >resource 9 [mem 0xfee01000-0xffffffff]
pci_bus 0000:01: >resource 0 [io 0x5000-0x5fff]
pci_bus 0000:01: >resource 1 [mem 0xd2000000-0xd30fffff]
pci_bus 0000:01: >resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:02: >resource 1 [mem 0xd7400000-0xd74fffff]
pci_bus 0000:03: >resource 0 [io 0x3000-0x4fff]
pci_bus 0000:03: >resource 1 [mem 0xd3400000-0xd73fffff]
pci_bus 0000:03: >resource 2 [mem 0xd7700000-0xd78fffff 64bit pref]
pci_bus 0000:44: >resource 1 [mem 0xd3300000-0xd33fffff]
pci_bus 0000:45: >resource 1 [mem 0xd3200000-0xd32fffff]
pci_bus 0000:46: >resource 0 [io 0x2000-0x2fff]
pci_bus 0000:46: >resource 1 [mem 0xd3100000-0xd31fffff]
pci_bus 0000:46: >resource 2 [mem 0xd8000000-0xdbffffff pref]
pci_bus 0000:46: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:46: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:46: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:46: >resource 7 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:46: >resource 8 [mem 0xf0000000-0xfedfffff]
pci_bus 0000:46: >resource 9 [mem 0xfee01000-0xffffffff]
pci_bus 0000:47: >resource 0 [io 0x2000-0x20ff]
pci_bus 0000:47: >resource 1 [io 0x2400-0x24ff]
pci_bus 0000:47: >resource 2 [mem 0xd8000000-0xdbffffff pref]
pci_bus 0000:47: >resource 3 [mem 0xdc000000-0xdfffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: >Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb77b0000-0xbb7affff] (64MB) mapped at [ffff8800b77b0000-ffff8800bb7affff]
audit: initializing netlink socket (disabled)
type=2000 audit(1353773354.336:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 31948
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:03.0: >irq 45 for MSI/MSI-X
pcieport 0000:00:1c.0: >irq 46 for MSI/MSI-X
pcieport 0000:00:1c.1: >irq 47 for MSI/MSI-X
pcieport 0000:00:1c.3: >irq 48 for MSI/MSI-X
pcieport 0000:00:1c.7: >irq 49 for MSI/MSI-X
aer 0000:00:03.0:pcie02: >service driver aer loaded
pcieport 0000:00:03.0: >Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: >Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:1c.0: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:1c.1: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:1c.3: >Signaling PME through PCIe PME interrupt
pci 0000:44:00.0: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:1c.7: >Signaling PME through PCIe PME interrupt
pci 0000:45:00.0: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: >service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.1:pcie04: >HPC vendor_id 8086 device_id 3b44 ss_vid 103c ss_did 1521
pciehp 0000:00:1c.1:pcie04: >service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1E
intel_idle: lapic_timer_reliable_states 0x2
ACPI: AC Adapter [AC] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: >registered as thermal_zone0
ACPI: Thermal Zone [EXTZ] (51 C)
thermal LNXTHERM:01: >registered as thermal_zone1
ACPI: Thermal Zone [EX2Z] (0 C)
thermal LNXTHERM:02: >registered as thermal_zone2
ACPI: Thermal Zone [PWMZ] (11 C)
thermal LNXTHERM:03: >registered as thermal_zone3
ACPI: Thermal Zone [LOCZ] (48 C)
thermal LNXTHERM:04: >registered as thermal_zone4
ACPI: Thermal Zone [GFXZ] (0 C)
thermal LNXTHERM:05: >registered as thermal_zone5
ACPI: Thermal Zone [BATZ] (32 C)
thermal LNXTHERM:06: >registered as thermal_zone6
ACPI: Thermal Zone [EGXZ] (58 C)
thermal LNXTHERM:07: >registered as thermal_zone7
ACPI: Thermal Zone [CPUZ] (60 C)
thermal LNXTHERM:08: >registered as thermal_zone8
ACPI: Thermal Zone [MCHZ] (0 C)
thermal LNXTHERM:09: >registered as thermal_zone9
ACPI: Thermal Zone [PCHZ] (75 C)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT1] (battery absent)
0000:00:16.3: ttyS4 at I/O 0x6050 (irq = 17) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: >version 3.0
ahci 0000:00:1f.2: >irq 50 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: >AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x37 impl SATA mode
ahci 0000:00:1f.2: >flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: >setting latency timer to 64
ACPI: Battery Slot [BAT0] (battery present)
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd7527000 port 0xd7527100 irq 50
ata2: SATA max UDMA/133 abar m2048@0xd7527000 port 0xd7527180 irq 50
ata3: SATA max UDMA/133 abar m2048@0xd7527000 port 0xd7527200 irq 50
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xd7527000 port 0xd7527300 irq 50
ata6: SATA max UDMA/133 abar m2048@0xd7527000 port 0xd7527380 irq 50
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: >setting latency timer to 64
ehci_hcd 0000:00:1a.0: >EHCI Host Controller
ehci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: >debug port 2
ehci_hcd 0000:00:1a.0: >cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: >irq 16, io mem 0xd7529000
ehci_hcd 0000:00:1a.0: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb1: >SerialNumber: 0000:00:1a.0
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >3 ports detected
ehci_hcd 0000:00:1d.0: >setting latency timer to 64
ehci_hcd 0000:00:1d.0: >EHCI Host Controller
ehci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: >debug port 2
ehci_hcd 0000:00:1d.0: >cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: >irq 20, io mem 0xd7528000
ehci_hcd 0000:00:1d.0: >USB 2.0 started, EHCI 1.00
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: EHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb2: >SerialNumber: 0000:00:1d.0
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:45:00.0: >xHCI Host Controller
xhci_hcd 0000:45:00.0: >new USB bus registered, assigned bus number 3
xhci_hcd 0000:45:00.0: >irq 19, io mem 0xd3200000
xhci_hcd 0000:45:00.0: >irq 51 for MSI/MSI-X
xhci_hcd 0000:45:00.0: >irq 52 for MSI/MSI-X
xhci_hcd 0000:45:00.0: >irq 53 for MSI/MSI-X
xhci_hcd 0000:45:00.0: >irq 54 for MSI/MSI-X
xhci_hcd 0000:45:00.0: >irq 55 for MSI/MSI-X
xhci_hcd 0000:45:00.0: >irq 56 for MSI/MSI-X
xhci_hcd 0000:45:00.0: >irq 57 for MSI/MSI-X
xhci_hcd 0000:45:00.0: >irq 58 for MSI/MSI-X
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: xHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb3: >SerialNumber: 0000:45:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >2 ports detected
xhci_hcd 0000:45:00.0: >xHCI Host Controller
xhci_hcd 0000:45:00.0: >new USB bus registered, assigned bus number 4
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: xHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb4: >SerialNumber: 0000:45:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:08: >RTC can wake from S4
rtc_cmos 00:08: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 4:149:187
thermal LNXTHERM:03: >hash matches
rtc_cmos 00:08: >setting system clock to 2012-11-24 16:09:15 UTC (1353773355)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: unexpected _GTF length (8)
ata1.00: ATA-8: Hitachi HTS725050A9A364, PC4OCH0A, max UDMA/100
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: unexpected _GTF length (8)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: >Direct-Access ATA Hitachi HTS72505 PC4O PQ: 0 ANSI: 5
sd 0:0:0:0: >Attached scsi generic sg0 type 0
sd 0:0:0:0: >[sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: >[sda] Write Protect is off
sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-1: >new high-speed USB device number 2 using ehci_hcd
sda: sda1 sda2 sda3 < sda5 sda6 >
sd 0:0:0:0: >[sda] Attached SCSI disk
usb 1-1: >New USB device found, idVendor=8087, idProduct=0020
usb 1-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: >USB hub found
hub 1-1:1.0: >6 ports detected
usb 2-1: >new high-speed USB device number 2 using ehci_hcd
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: unexpected _GTF length (8)
ata2.00: ATAPI: hp CDDVDW TS-L633R, 0200, max UDMA/100
ata2.00: unexpected _GTF length (8)
ata2.00: configured for UDMA/100
scsi 1:0:0:0: >CD-ROM hp CDDVDW TS-L633R 0200 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: >Attached scsi CD-ROM sr0
sr 1:0:0:0: >Attached scsi generic sg1 type 5
usb 2-1: >New USB device found, idVendor=8087, idProduct=0020
usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: >USB hub found
hub 2-1:1.0: >8 ports detected
usb 3-2: >new low-speed USB device number 2 using xhci_hcd
Refined TSC clocksource calibration: 1595.999 MHz.
Switching to clocksource tsc
usb 3-2: >New USB device found, idVendor=04f3, idProduct=02f4
usb 3-2: >New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-2: >Product: 2.4G Wireless Mouse
usb 3-2: >ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-1.3: >new full-speed USB device number 3 using ehci_hcd
ata3: SATA link down (SStatus 0 SControl 300)
usb 1-1.3: >New USB device found, idVendor=138a, idProduct=0007
usb 1-1.3: >New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 1-1.3: >SerialNumber: 00b068924e86
usb 1-1.5: >new high-speed USB device number 4 using ehci_hcd
usb 1-1.5: >New USB device found, idVendor=04f2, idProduct=b15e
usb 1-1.5: >New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-1.5: >Product: HP Webcam [2 MP Macro]
usb 1-1.5: >Manufacturer: Chicony Electronics Co., Ltd.
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 928k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1472k freed
Freeing unused kernel memory: 1124k freed
udevd[133]: starting version 175
e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
e1000e 0000:00:19.0: >setting latency timer to 64
e1000e 0000:00:19.0: >Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: >irq 59 for MSI/MSI-X
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:46:06.1: >SDHCI controller found [1180:0822] (rev 25)
sdhci-pci 0000:46:06.1: >Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:46:06.1: >setting latency timer to 64
mmc0: no vmmc regulator found
sdhci-pci 0000:46:06.1: >Will use DMA mode even though HW doesn't fully claim to support it.
Registered led device: mmc0::
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
mmc0: SDHCI controller on PCI [0000:46:06.1] using DMA
firewire_ohci 0000:46:06.0: >setting latency timer to 64
input: 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:1c.7/0000:45:00.0/usb3/3-2/3-2:1.0/input/input4
hid-generic 0003:04F3:02F4.0001: >input,hiddev0,hidraw0: USB HID v1.11 Mouse [2.4G Wireless Mouse] on usb-0000:45:00.0-2/input0
sdhci-pci 0000:46:06.1: >Will use DMA mode even though HW doesn't fully claim to support it.
firewire_ohci 0000:46:06.0: >added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
sdhci-pci 0000:46:06.1: >Will use DMA mode even though HW doesn't fully claim to support it.
e1000e 0000:00:19.0: >eth0: (PCI Express:2.5GT/s:Width x1) 68:b5:99:ef:6f:85
e1000e 0000:00:19.0: >eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: >eth0: MAC: 9, PHY: 10, PBA No: 2052FF-0FF
sdhci-pci 0000:46:06.1: >Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:46:06.1: >Will use DMA mode even though HW doesn't fully claim to support it.
firewire_core 0000:46:06.0: created device fw0: GUID 5566778811223344, S400
EXT4-fs (sda5): INFO: recovery required on readonly filesystem
EXT4-fs (sda5): write access will be enabled during recovery
EXT4-fs (sda5): orphan cleanup on readonly fs
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 8257560
EXT4-fs (sda5): 1 orphan inode deleted
EXT4-fs (sda5): recovery complete
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
Adding 26428412k swap on /dev/sda6. Priority:-1 extents:1 across:26428412k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[397]: starting version 175
lp: driver loaded but no devices found
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
parport_pc 00:09: >reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
lp0: using parport0 (interrupt-driven).
wmi: Mapper loaded
acpi device:04: >registered as cooling_device8
ACPI: Can't attach device
video: probe of LNXVIDEO:00 failed with error -2
ppdev: user-space parallel port driver
tpm_tis 00:04: >1.2 TPM (device-id 0xB, rev-id 16)
microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x3
ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting iTCO_wdt
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
mei 0000:00:16.0: >setting latency timer to 64
mei 0000:00:16.0: >irq 60 for MSI/MSI-X
tpm_tis 00:04: >TPM is disabled/deactivated (0x7)
hp_accel: hardware type NC854xx found
lis3lv02d: 8 bits sensor found
input: HP WMI hotkeys as /devices/virtual/input/input5
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
Registered led device: hp::hddprotect
hp_accel: driver loaded
EDAC MC: Ver: 2.1.0
EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50
r592 0000:46:06.2: >setting latency timer to 64
r592: driver successfully loaded
microcode: CPU1 sig=0x106e5, pf=0x10, revision=0x3
microcode: CPU2 sig=0x106e5, pf=0x10, revision=0x3
microcode: CPU3 sig=0x106e5, pf=0x10, revision=0x3
microcode: CPU4 sig=0x106e5, pf=0x10, revision=0x3
microcode: CPU5 sig=0x106e5, pf=0x10, revision=0x3
microcode: CPU6 sig=0x106e5, pf=0x10, revision=0x3
microcode: CPU7 sig=0x106e5, pf=0x10, revision=0x3
microcode: Microcode Update Driver: v2.00 , Peter Oruba
yenta_cardbus 0000:46:06.4: >CardBus bridge found [103c:1521]
[drm] Initialized drm 1.1.0 20060810
cfg80211: Calling CRDA to update world regulatory domain
yenta_cardbus 0000:46:06.4: >ISA IRQ mask 0x0c98, PCI irq 22
yenta_cardbus 0000:46:06.4: >Socket status: 30000810
pci_bus 0000:46: >Raising subordinate bus# of parent bus (#46) from #47 to #4a
yenta_cardbus 0000:46:06.4: >pcmcia: parent PCI bridge window: [io 0x2000-0x2fff]
yenta_cardbus 0000:46:06.4: >pcmcia: parent PCI bridge window: [mem 0xd3100000-0xd31fffff]
pcmcia_socket pcmcia_socket0: >cs: memory probe 0xd3100000-0xd31fffff:
excluding 0xd3100000-0xd310ffff
yenta_cardbus 0000:46:06.4: >pcmcia: parent PCI bridge window: [mem 0xd8000000-0xdbffffff pref]
pcmcia_socket pcmcia_socket0: >cs: memory probe 0xd8000000-0xdbffffff:
excluding 0xd8000000-0xdbffffff
r852 0000:46:06.3: >setting latency timer to 64
r852: driver loaded successfully
Linux video capture interface: v2.00
kvm: disabled by bios
uvcvideo: Found UVC 1.00 device HP Webcam [2 MP Macro] (04f2:b15e)
input: HP Webcam [2 MP Macro] as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input8
snd_hda_intel 0000:00:1b.0: >power state changed by ACPI to D0
snd_hda_intel 0000:00:1b.0: >power state changed by ACPI to D0
snd_hda_intel 0000:00:1b.0: >irq 61 for MSI/MSI-X
iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
iwlwifi: Copyright(c) 2003-2012 Intel Corporation
iwlwifi 0000:44:00.0: >pci_resource_len = 0x00002000
iwlwifi 0000:44:00.0: >pci_resource_base = ffffc9001263c000
iwlwifi 0000:44:00.0: >HW Revision ID = 0x35
iwlwifi 0000:44:00.0: >irq 62 for MSI/MSI-X
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
hda_intel: Disabling MSI
hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
pcmcia_socket pcmcia_socket0: >pccard: PCMCIA card inserted into slot 0
pcmcia_socket pcmcia_socket0: >cs: memory probe 0xd3110000-0xd31fffff:
excluding 0xd31fe000-0xd320bfff
pcmcia 0.0: >pcmcia: registering new device pcmcia0.0 (IRQ: 22)
pcmcia_socket pcmcia_socket0: >cs: memory probe 0x0c0000-0x0fffff:
excluding 0xc0000-0xfffff
pcmcia_socket pcmcia_socket0: >cs: memory probe 0xa0000000-0xa0ffffff:
excluding 0xa0000000-0xa0ffffff
pcmcia_socket pcmcia_socket0: >cs: memory probe 0x60000000-0x60ffffff:
excluding 0x60000000-0x60ffffff
iwlwifi 0000:44:00.0: >loaded firmware version 9.221.4.1 build 25532
iwlwifi 0000:44:00.0: >CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:44:00.0: >CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:44:00.0: >CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:44:00.0: >CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
iwlwifi 0000:44:00.0: >CONFIG_IWLWIFI_P2P disabled
iwlwifi 0000:44:00.0: >Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
iwlwifi 0000:44:00.0: >L1 Disabled; Enabling L0S
iwlwifi 0000:44:00.0: >RF_KILL bit toggled to disable radio.
iwlwifi 0000:44:00.0: >device EEPROM VER=0x436, CALIB=0x6
iwlwifi 0000:44:00.0: >Device SKU: 0x1F0
iwlwifi 0000:44:00.0: >Valid Tx ant: 0x7, Valid Rx ant: 0x7
iwlwifi 0000:44:00.0: >Tunable channels: 13 802.11bg, 24 802.11a channels
Registered led device: phy0-led
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
psmouse serio4: >synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd44773/0xa40000/0xa0000
ieee80211 phy0: >Selected rate control algorithm 'iwl-agn-rs'
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13
scsi6 : pata_pcmcia
ata7: PATA max PIO0 cmd 0x2100 ctl 0x210e irq 22
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input17
type=1400 audit(1353769766.985:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=856 comm="apparmor_parser"
type=1400 audit(1353769766.985:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=800 comm="apparmor_parser"
type=1400 audit(1353769766.985:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=954 comm="apparmor_parser"
type=1400 audit(1353769766.985:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=856 comm="apparmor_parser"
type=1400 audit(1353769766.985:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=800 comm="apparmor_parser"
type=1400 audit(1353769766.985:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=954 comm="apparmor_parser"
type=1400 audit(1353769766.985:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=856 comm="apparmor_parser"
type=1400 audit(1353769766.985:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=800 comm="apparmor_parser"
type=1400 audit(1353769766.985:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=954 comm="apparmor_parser"
init: failsafe main process (973) killed by TERM signal
type=1400 audit(1353769769.649:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1058 comm="apparmor_parser"
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.60 Sun Oct 14 20:23:00 PDT 2012
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: smbd main process (993) killed by HUP signal
init: smbd main process ended, respawning
e1000e 0000:00:19.0: >irq 59 for MSI/MSI-X
e1000e 0000:00:19.0: >irq 59 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
FS-Cache: Loaded
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
Key type cifs.idmap registered
CIFS: no cache= option specified, using "cache=loose". This default will change to "cache=strict" in 3.7.
CIFS VFS: Error connecting to socket. Aborting operation
CIFS VFS: cifs_mount failed w/return code = -101
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90013300000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
init: plymouth-splash main process (1499) terminated with status 1
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.